Aston Martin Rapide S, 2014

 

 

 

•  Aston Martin Rapide S, 2014

The stunning new Aston Martin Rapide S is making its debut with yet more luxury and yet more power on offer in its quintessentially elegant four-door silhouette.

The iconic British car maker's new luxury GT has been sympathetically redesigned and painstakingly re-engineered to reassert its position as the world's most beautiful, and beautifully balanced, four-seat sports car.

Aside from the extensive design and engineering improvements, the luxurious new Aston Martin Rapide S - which replaces the outgoing Rapide in markets worldwide - is now even more refined thanks to a range of additions to the four-seater's sumptuous interior.

Still instantly recognisable as an Aston Martin, of course, the new Aston Martin Rapide S now boasts an imposing and assertive new 'face', created by virtue of the impressive and striking new full grille.

Imbuing the new car with an even more sporting, forceful demeanour, the revised front end design is matched at the back by a striking new rear deck profile which includes a more pronounced boot lid 'flip'. The aerodynamic and aesthetic upgrades both reinforce the sporting nature of new Aston Martin Rapide S and work to counteract lift at higher speeds.

Aston Martin Chief Executive Officer, Dr Ulrich Bez said: "The Rapide S is to me, without doubt, the most beautiful four-door sports car on the market today. This is, very clearly, the power of luxury in action.

Engineered to excel
Changes under the new Rapide's skin are comprehensive, with a version of the new AM11 naturally-aspirated 6.0-litre V12 powerplant delivering unprecedented power and improved in-gear acceleration.

Power from the new engine jumps significantly versus that of its predecessor: up by 17% or a massive 81 PS from 477 PS at 6,000 rpm to a now very substantial 558 PS at 6,750 rpm.

Peak torque increases, too, up from 600 Nm to 620 Nm at 5,000 rpm. Meanwhile an even more marked improvement in torque occurs lower down the rev range, as pulling power rises by more than 40 Nm between idle and 4,000 rpm with an additional 50 Nm available at 2,500 rpm.

Naturally, increases in power and torque lead to even swifter performance as befits a four-door sports car. New Aston Martin Rapide S shaves 0.3 seconds off its 0-62 mph time, which drops from the 5.2 seconds of the current car to just 4.9 seconds for the new model. Top speed climbs, meanwhile, to 190 mph.

The 5,935 cc naturally aspirated V12 boasts race car technology - developments derived directly from Aston Martin Racing's successful WEC GT campaign - to maximise both performance and efficiency. The new AM11 engine thus boasts fully CNC machined combustion chambers and lighter, hollow, cam shafts.

Dual variable camshaft timing, knock sensing, even the fully catalysed stainless steel exhaust system - these are all engineering advances developed to preserve the V12's position as a mainstay of the Aston Martin range.

The engine is now even more efficient, too. Despite the very significant increase in peak power and torque, the Aston Martin Rapide S is appreciably more economical than before. CO2 emissions drop by seven per cent - from 355 g/km to 332 g/km - while fuel economy now stands at 19.9 mpg on the official EU combined cycle.

A product of the latest generation of Aston Martin's world-renowned VH engineering philosophy, which debuted in 2003, the new car of course benefits from many elements of the current Gen4 VH architecture.

The carefully conceived engineering changes continue as the new Rapide now offers even sharper agility and even quicker responses to driver input. The new AM11 engine - a key Gen4 component - has been lowered by 19 mm versus the position of the powerplant in the previous car, with a corresponding reduction in the sports car's centre of gravity.

The changes also lead to a tangible improvement in front end turn-in - no mean feat for a car that was already acknowledged as a leader in dynamic performance.

Aston Martin engineers at the company's global HQ in Gaydon have worked to revise the car's dynamic stability control (DSC) in line with its significant increases in both power and torque.

As befits the more sporting nature of new Aston Martin Rapide S the car benefits from the latest Gen4 iteration of Aston Martin's hi-tech Adaptive Damping System (ADS). The system now offers three distinct settings: 'Normal', 'Sport' and 'Track', with the character of each being tailored to the nature of Aston Martin Rapide S.

The ADS automatically alters the suspension settings to ensure the driver has high levels of control at all times, with the ability to respond quickly to different driving conditions. The different damping modes help to significantly broaden the character of the Aston Martin Rapide S, adapting its set-up to suit the driver's precise requirements. Thus it can be a luxurious GT car in Normal mode with the capacity to morph into a more assertive sports car in Sport and Track modes.

The damper settings are determined by an electronic control unit which takes sensor readings from the car's systems, including throttle position, brake position, steering wheel rotation and vehicle speed. This data establishes the prevailing driving conditions and the demands the driver is making on the car.

Head of Product Development at Aston Martin, Ian Minards, explains: "Growing the power in a luxury sports car is all very well, but maximising control and 'usability' of that increased power is, just as much, the engineers' challenge.

Meanwhile, as with the new DB9, the new Aston Martin Rapide S achieves compliance with the latest European pedestrian protection regulations courtesy of its innovative new front grille design.

The lowered engine, new bonnet, new front bumper construction and new grille combine to deliver a uniquely innovative approach to pedestrian impact protection.

The patent-pending design - which features a unique 'keystone' construction - enables the grille to move rearwards on impact, whilst the central and outboard chin stiffeners give rigidity to the lower structure and support achievement of the leg impact regulations. Cut-outs on the front wing catwalks contribute to the achievement of the headform regulation.

The solution means Aston Martin can remain true to its design ethos, and avoid the use of plastic grilles and nose cone bumpers that stretch up in front of the bonnet.

First class cabin
As luxurious as it is thrilling, the new car now boasts a host of new luxury- or sports-orientated options, allowing buyers to more precisely tailor the car to their specific style.

The new optional Carbon Exterior Pack, for instance, immediately dials up the Rapide's sporting attitude. Front splitter, rear diffuser, mirror caps and rear lamp infills all fashioned from carbon fibre clearly signal the sporting nature of this 558 PS four-seater.

More pronounced luxury, on the other hand, comes from the new piano black interior pack that adds a deep, rich, mirror-like shine to the facia, transmission tunnel centre plate and door handles of the Aston Martin Rapide S. A darker surround in the instrument binnacle and steering wheel with black horn-push surround round off the pack's sumptuous additions. Luxurious blend headlinings in either tan or grey emphasise the luxury still further inside.

As would be expected of a modern Aston Martin, handcrafting is the order of the day in the Aston Martin Rapide S with the standard-fit pure glass transmission selector switches in the centre console one small yet important example of the truly authentic, bespoke, nature of the car's cabin.

However those with a desire for a more sporting ambience in their sports car will not be disappointed. Optional duotone perforated red and black leather makes its Aston Martin debut here - delivering a captivating visual combination that's unique to the new Aston Martin Rapide S.

Luxury is enhanced by the removal of extraneous 'noise' and the enhancement of desirable 'sound' - a fine distinction but one that helps the new car deliver an aural experience like no other. Improved NVH (noise, vibration and harshness) characteristics are derived from the likes of the new bonnet lining and revised windscreen cowl.

Flexibility comes in the form of four seats - the rearmost two capable of accommodating adults in a uniquely sporting setting - while at the touch of a button the individual back seats fold down to almost triple the Aston Martin's load space.

Options to further enhance the luxurious look and feel of the Aston Martin Rapide S include, subject to market, a reversing camera and twin screen rear seat entertainment system with wireless headphones, remote control and six-disc DVD changer.

Those seeking the ultimate in luxury and personalisation can also consider the 'Q by Aston Martin' service which offers uniquely-tailored options for individualisation. The Q service focuses on fashioning colour and materials with limitless boundaries precisely to customer choice and specification, enabling owners to give free rein to the creativity and indulge their desire for bespoke luxury.

Alfa Romeo 4C, 2014

 

 

 

• Alfa Romeo 4C, 2014

The global launch of the Alfa Romeo 4C marks the return of the brand to the world of lightweight sports coupés, an extraordinary event, awaited ever more eagerly by the host of fans throughout the world. The exclusive 'Launch Edition' was created just for them, a numbered limited edition of 400 in Europe with exclusive characteristics developed specifically for this unique version.

It made its début, at the 2013 Geneva International Motor Show, where orders officially opened for the 'Launch Edition' of the new 4C compact supercar at a price of 60,000 euros in most European markets (price including VAT net of other local taxes). What's more, all buyers can take part in an exclusive event which will include an advanced driving course, to learn how to make the most of its potential in complete safety.

The new Launch Edition can 'clothe' its body with two liveries - Carrara White or Alfa Red - and is marked out by the distinctive badge, inlaid beneath the paintwork. The line of the special car is enhanced by the carbon aerodynamic kit (including spoiler and door mirror covers), the rear aluminium diffuser with dark finishing, Bi-LED headlights with dark surround and 18" (front) and 19" (rear) alloy wheels with burnishing treatment.

To accentuate the sports look still further, there are front air intakes, brake calipers in a specific colour, racing exhaust system with BMC air cleaner and suspension kit with specific calibration for shock absorbers and rear anti-roll bar.

The interior has the same sports feel, with highlights provided by the leather/fabric sports seats with parts in Alcantara, as well as the distinctive, numbered carbon badge. In the case of the red livery, the Alfa Romeo 4C Launch Edition has red stitching on the steering wheel trim, handbrake, mats, handles and sports seats.

Of course, the Alfa Romeo 4C Launch Edition offers all the winning characteristics of the model that represents the essential sportiness embedded in the 'Alfa Romeo DNA': Italian style, performance and technical excellence, for maximum driving pleasure in complete safety.

Designed by Alfa Romeo and produced in the Maserati plant in Modena, the new mid-engined rear-wheel drive coupé with two bucket seats will be become available for purchase in 2013 and will mark the return of the Italian brand to the United States, inaugurating Alfa Romeo's global growth plan.

The Alfa Romeo 4C derives directly from the concept which raised many eyebrows in admiration at the Geneva Show in 2011, so much so that it won three prestigious awards: the 'AutoBild Design Award' (2011, Germany), the 'Design Award for Concept Cars & Prototypes' (2012, Italy) and the 'Most Exciting Car of 2013' - 'What Car?' (2013, Great Britain).

Acronym 4C
The acronym '4C' draws its inspiration from the brand's glorious past, projecting the values of technology and emotions into the future. Indeed, it refers to Alfa Romeo's great sporting tradition: the acronyms 8C and 6C in the 1930s and 1940s distinguished cars - both racing and non - fitted with the powerful 'eight cylinders' and the innovative 'six cylinders', confirming in its design layout and construction the goal of achieving the weight/power ratio of an authentic supercar, less than 4 kg/HP, yet focusing not merely on the maximum power delivered, but on limiting the weight to guarantee maximum agility and top performance. To this end, the Alfa Romeo 4C uses state-of-the-art technologies and materials derived from super sports cars (including the Alfa Romeo 8C Competizione) - carbon fibre, aluminium, rear-wheel drive - and technologies from the latest standard models from Alfa Romeo, but updated to enhance the sports appeal of the new car even further. This is demonstrated by the new 1750 Turbo Petrol all-aluminium engine with direct injection, the sophisticated "Alfa TCT" twin dry clutch transmission and the Alfa DNA selector with the brand-new Race mode.

Exterior style
Designed by the Alfa Romeo Style Centre, the 4C immediately brings to mind some of the traditional iconic models which have left a significant mark in the history of the Brand. Above all others, in terms of dimensional and layout similarities, one stands out in particular: the 33 Stradale, a car that combined extreme mechanical and functional requirements with an essential style which "clothed" the engine and chassis appropriately with unmistakable Alfa Romeo treatments.

The 4C has followed suit, and thus completes a journey which was embarked upon with the 8C Competizione, emphasising some particular concepts of the brand, such as compact size, dynamism and agility.

The development of the 4C's exterior was characterised from the start by the need to enhance the style of the car and the technical characteristics both from a dynamic and aerodynamic point of view. For this reason, all the style solutions adopted have been optimised in accordance with the ultimate goal of the car: performance.

The rear volume, sinuous and enveloping, simultaneously encloses and embraces the beating heart of the car: the mechanics and the engine, visible through the rear window.

All this, thanks to the development of marked musculature above the wheels, lends strength and power to the rear end.

The rear musculature supports its structure on round rear light clusters and on the side air intakes necessary to cool the intercooler and the air intake for engine aspiration.

From this energy-charged rear volume and the two side air intakes spring the two long muscles which lend speed and dynamism to the side, generating the necessary volume at the front end to house the headlights and, on the central part, the two robust ribs running along the bonnet, tracing the unmistakable "V" and coming to their natural conclusion around the shield.

This, together with the two side intakes, forms the famous "Trefoil", a substantial facet of Alfa Romeo's profile.

Interior design
The elemental design and essential materials also distinguish the interior, which is all designed and built for maximum driving satisfaction.

Specifically, the carbon fibre of the central cell immediately stands out in the interior, left in full view to enhance the sense of low weight, technology and uniqueness of the car.

The dashboard and door panels have an "asphalt " treatment to recall the vocation of the Alfa Romeo 4C, conceived to convey maximum driving sensation from the road.

The seats ensure dedicated sports posture, favouring the driver's contact with the road without, however, compromising the comfort required for everyday use of the car.

The dashboard, simple and designed to make using functions simple too, reaches its zenith in the concept of extreme driver-orientation, thanks to digital instruments and gear shift controls located on the appropriately shaped steering wheel.

The cockpit, which powerfully suggests the world of motorcycle racing and race cars, brings together all information necessary to drive and control the car.

The information, which is rendered captivating through powerful, high-impact graphics, allows the driver to keep everything under control without distractions from controls that would be superfluous on this type of car.

The pedal unit and footboards for driver and passenger are all made of aluminium and embellish the lower part under the dashboard, highlighting sports character down to the smallest detail.

Dimensions and aerodynamics
The compact dimensions make this car with 2 bucket seats truly unique among its competitors: 399 cm long, 200 cm wide, 118 cm high and with a wheelbase of 238 cm. These dimensions serve both to emphasise the car's "supercar proportions" and to accentuate its agility. What's more, owing to the designers' excellent work, the car achieves maximum aerodynamic efficiency levels, guaranteeing a negative Cz which, as in racing cars, contributes towards achieving increased stability at higher speeds thanks to the aerodynamic downforce.

New direct-injection 240 HP 1750 Turbo Petrol engine
The engine is the beating "heart" of an Alfa Romeo. In this case, it's the new direct-injection 240 HP 4-cylinder 1750 Turbo Petrol, which was designed with a precise objective: to ensure exceptional performance without sacrificing driving fluidity and use in any circumstances, from the racetrack to the city streets. The Alfa Romeo 4C's new mid-engine, all-aluminium power unit adopts specific optimised intake and exhaust systems, to enhance both response at low speeds and extension, with the assistance of a crankshaft with eight counterweights. In addition, it boasts cutting-edge technical solutions including direct petrol injection, dual (intake and exhaust) continuous variable valve timing, a turbocharger and a revolutionary scavenging control system that eliminates turbo lag. Torque delivery is generous, with a peak of 350 Nm, 80% of which is available at only 1700 rpm.

Alfa TCT twin dry clutch transmission
The 1750 Turbo Petrol engine is teamed with the Alfa TCT twin dry clutch transmission, which is a genuine benchmark in the category due to its limited weight and extreme speed of activation. The gears can be changed in sequential mode using the "shift paddles" located behind the steering wheel. Compared to the version already adopted on the Giulietta and MiTo models, the TCT on the Alfa Romeo 4C implements next-generation software and features the new 'Launch Control' function that optimises all car systems to provide the utmost acceleration possible. What's more, to ensure the best performance in accordance with the road conditions and driving style, the Alfa TCT adopts optimised operating logic, interacting with the Alfa DNA selector, the braking system, the engine management system and the vehicle stability control system. For example, in automatic mode, the shifting logic differs according to the Alfa DNA setting.

The new Alfa DNA selector with 'Race' mode
A specific evolution of the Alfa DNA selector has been developed for Alfa Romeo 4C, which not only features the three standard settings available on other models in the range - Dynamic, Natural and All Weather - but also a fourth mode: 'Race', designed to enhance the driving experience on a racetrack even further. It only takes a long press of the selector in Dynamic position to activate it: in this mode, the Alfa DNA deactivates the stability control and anti-slip systems, leaving the driver in full, exciting control. Finally, the full-digital instrument panel with TFT display changes configuration - showing only information relevant to the chosen mode - and colour in line with the Alfa DNA setting: yellow for Race, red for Dynamic, grey for Natural and blue for All Weather.

Solid but lightweight structure
A stiff, strong but light structure is an essential pre-requisite for a high-performance sports car. The same principle inspired the creation of the Alfa Romeo 4C. A state-of-the-art combination of hi-tech materials of extraordinary stiffness and strength, together with a very low specific weight, was selected to achieve this result. In particular, the chassis is a monocoque made entirely of carbon fibre with 'pre-preg' technology derived from Formula 1 and adopted only by the most advanced supercars, which weighs only 65 kilograms, inside which a space is formed for the driver and passenger. The front and rear structures of the chassis and the roof reinforcements are made entirely of aluminium.

Additionally, the car's bodywork is made entirely of low-density, high-strength composite material. Benefits of using this material include lighter weight (it is 20% lighter than steel) and resistance to corrosion. Dimensional stability is comparable to steel and better than aluminium.

Finally, the seats have a mixed carbon fibre and fibreglass structure which guarantees high resistance to stresses and a particularly low weight at the same time.

The final result is a significant reduction in overall weight (the dry weight is just 895 kg) combined with the best possible torsional stiffness and strength characteristics, as well as the optimisation of the car's centre of gravity, which gives the advantage of increased agility and drivability on the most challenging roads.

Suspension
The Alfa Romeo 4C has an extremely sophisticated suspension layout - 'superimposed wishbones' at the front, development of MacPherson at the rear - to ensure maximum agility and road holding. This solution, along with the rear-wheel drive and the extraordinary weight to power ratio, ensures Alfa Romeo driving pleasure, enhanced even further by the weight distribution (40% on the front axle and 60% on the rear axle). What's more, for those wanting the maximum in terms of handling, a complete suspension kit will be available with a specific calibration of the shock absorbers and rear anti-roll bar.

Braking system, wheels and steering
To ensure decisive braking even under the most intensive conditions, the braking system has four self-ventilating perforated discs, with Brembo four-piston aluminium calipers on the front axle. In addition, to "stick" the car firmly onto the road surface, tyres with a different diameter and width depending on whether they are fitted at the front or rear have been fitted (two variants possible, either 17"-18" or 18"-19") which were developed especially to guarantee excellent performance (a kit of tyres with a softer mix is also provided for optimised grip). In line with the car's setup, the steering system of the 4C does not feature power steering, to save weight but above all to secure a superlative driving feel. An appropriate steering wheel load is maintained thanks to the low overall weight of the car.

Real supercar performance
The implemented state-of-the-art technical and technological solutions drive the Alfa Romeo 4C to reach real supercar performance with a unique driving feel. This is demonstrated by a top speed in excess of 250 km/h, only 4.5 seconds to accelerate from 0 to 100 km/h, 1.1 of side acceleration on corners and 1.25 g of maximum braking deceleration.

Excellence made in Italy
The very best technical and industrial expertise of the Alfa Romeo and Maserati brands was used to develop the Alfa Romeo 4C. Specifically, the teamwork between the two brands was aimed at the integration of the Alfa Romeo design department with the Maserati production plant. This was boosted by the technical and technological contribution of other Italian companies, international leaders in the sector of high-performance sports car components. In short, this too is a distinguishing trait of Alfa Romeo, a brand with a century of history that continues to be one of the most famous and popular ambassadors of Italian products across the world.

Bugatti Veyron Grand Sport Vitesse WRC, 2013

 

 

•  Bugatti Veyron Grand Sport Vitesse WRC, 2013

Bugatti is presenting the Bugatti Veyron 16.4 Grand Sport Vitesse fresh from its record-breaking 408.84 km/h drive. Its appearance at China's biggest motor show will be the first time that enthusiasts from all over the world get the chance to see the world record holder for the fastest production roadster. China is one of the most important markets in the French luxury marque's future strategy. The new world record has inspired Bugatti to design a World Record Car (WRC) edition, the production of which will be limited to just eight vehicles.

The time has come to unveil the fastest production roadster the world has ever seen: just a few days after setting a world speed record, the Bugatti Veyron 16.4 Grand Sport Vitesse is celebrating its world debut at China's biggest automotive show, Auto Shanghai 2013. After reaching a top speed of 408.84 km/h, which was gauged and confirmed by the renowned independent German organisation for Technical Inspection and Certification TÜV, the car has officially been crowned the world's fastest open-top production sports car. The 1,200 PS Vitesse was unveiled in Shanghai by the President of Bugatti, Dr Wolfgang Schreiber, and Chinese entrepreneur and world record setting driver, Anthony Liu.

The Bugatti Veyron 16.4 Grand Sport Vitesse has been on the market since spring 2012. None of the technology in the vehicle was modified for its record-breaking trip. Its power comes from an 8-litre W16 engine, which hits the streets with 1,200 PS and a torque of 1,500 Mm at 3,000 to 5,000 rpm. Its high performance handling can be attributed to a racing chassis which, together with extremely fast-acting shock absorbers and reinforced anti-roll bars, guarantees exact control of both the four-wheel-drive system and the entire vehicle. Other factors that help to push the car to the upper limits of performance include a standard carbon monocoque with high torsional rigidity and an outer shell made entirely of carbon fibre.

Keeping wind noise and air turbulence to a minimum in the vehicle's interior is a particular concern with open-top vehicles. The Vitesse is equipped with a specially developed roof spoiler along with an intricately designed windbreak to guarantee calm open-top driving. These features were key in helping the car reach the record-breaking speed of 408.84 km/h.

World record-breaking Vitesse with dynamic styling
For its record-breaking drive, the Vitesse has been made over with a powerful dual-colour scheme in black and a bright Arancia orange, perfectly blending its inner qualities into its exterior appearance.

The entire vehicle exterior, including its air ducts and the fuel and oil cap, are made out of black visible carbon. The Arancia orange paintwork, which glides from the bumper, across the wing to the behind the door, ensures that the car turns heads wherever it goes. Fine details, such as the Arancia paintwork on the bottom of the rear wing and the inside of the striking double diffuser, accentuate the car's eye-catching design. The strong colour scheme is also mirrored in the orange EB logo on the fuel and oil cap and the Vitesse lettering on the engine cover, while the classic Bugatti horseshoe radiator grill is framed in Arancia for this special edition design. The car's distinctive look is rounded off by striking wheel rims also in eye-catching orange, a feature that is only available in the Vitesse World Record edition. A black version of the famous Bugatti emblem, known in French as the Macaron, on the front of the car and a stylish black carbon EB logo framed in aluminium add another touch of elegance to the design.

Interior
The black and orange motif continues into the vehicle's interior where the black inner parts of the leather seats are highlighted with orange leather on their sides. An orange quilting stitch on the black areas of the seats and orange seatbelts add another splash of colour. The colour scheme continues in the contrast and quilting stitch on the centre tunnel, on the selector lever, and in the trim of the door pockets and door handle recesses. The striking Arancia orange also highlights the Vitesse lettering on the headrests and knee bolsters.

An orange stitching trim adds a dash of detail to the black leather steering wheel, which features a ring of visible carbon at the 12 o'clock position. The concept of bringing the vehicle's carbon exterior into its interior design is also visible in the door inserts, the extension of the centre console, the edging of the iPad console and the belt outlet trims on the seats. The EB logo in the leather back panel is also made of visible carbon.

Production of the World Record Car (WRC) Edition of the Bugatti Veyron 16.4 Grand Sport Vitesse is limited to just eight vehicles. The price per vehicle is €1.99 million (plus tax).