Aston Martin Rapide S, 2014

 

 

 

•  Aston Martin Rapide S, 2014

The stunning new Aston Martin Rapide S is making its debut with yet more luxury and yet more power on offer in its quintessentially elegant four-door silhouette.

The iconic British car maker's new luxury GT has been sympathetically redesigned and painstakingly re-engineered to reassert its position as the world's most beautiful, and beautifully balanced, four-seat sports car.

Aside from the extensive design and engineering improvements, the luxurious new Aston Martin Rapide S - which replaces the outgoing Rapide in markets worldwide - is now even more refined thanks to a range of additions to the four-seater's sumptuous interior.

Still instantly recognisable as an Aston Martin, of course, the new Aston Martin Rapide S now boasts an imposing and assertive new 'face', created by virtue of the impressive and striking new full grille.

Imbuing the new car with an even more sporting, forceful demeanour, the revised front end design is matched at the back by a striking new rear deck profile which includes a more pronounced boot lid 'flip'. The aerodynamic and aesthetic upgrades both reinforce the sporting nature of new Aston Martin Rapide S and work to counteract lift at higher speeds.

Aston Martin Chief Executive Officer, Dr Ulrich Bez said: "The Rapide S is to me, without doubt, the most beautiful four-door sports car on the market today. This is, very clearly, the power of luxury in action.

Engineered to excel
Changes under the new Rapide's skin are comprehensive, with a version of the new AM11 naturally-aspirated 6.0-litre V12 powerplant delivering unprecedented power and improved in-gear acceleration.

Power from the new engine jumps significantly versus that of its predecessor: up by 17% or a massive 81 PS from 477 PS at 6,000 rpm to a now very substantial 558 PS at 6,750 rpm.

Peak torque increases, too, up from 600 Nm to 620 Nm at 5,000 rpm. Meanwhile an even more marked improvement in torque occurs lower down the rev range, as pulling power rises by more than 40 Nm between idle and 4,000 rpm with an additional 50 Nm available at 2,500 rpm.

Naturally, increases in power and torque lead to even swifter performance as befits a four-door sports car. New Aston Martin Rapide S shaves 0.3 seconds off its 0-62 mph time, which drops from the 5.2 seconds of the current car to just 4.9 seconds for the new model. Top speed climbs, meanwhile, to 190 mph.

The 5,935 cc naturally aspirated V12 boasts race car technology - developments derived directly from Aston Martin Racing's successful WEC GT campaign - to maximise both performance and efficiency. The new AM11 engine thus boasts fully CNC machined combustion chambers and lighter, hollow, cam shafts.

Dual variable camshaft timing, knock sensing, even the fully catalysed stainless steel exhaust system - these are all engineering advances developed to preserve the V12's position as a mainstay of the Aston Martin range.

The engine is now even more efficient, too. Despite the very significant increase in peak power and torque, the Aston Martin Rapide S is appreciably more economical than before. CO2 emissions drop by seven per cent - from 355 g/km to 332 g/km - while fuel economy now stands at 19.9 mpg on the official EU combined cycle.

A product of the latest generation of Aston Martin's world-renowned VH engineering philosophy, which debuted in 2003, the new car of course benefits from many elements of the current Gen4 VH architecture.

The carefully conceived engineering changes continue as the new Rapide now offers even sharper agility and even quicker responses to driver input. The new AM11 engine - a key Gen4 component - has been lowered by 19 mm versus the position of the powerplant in the previous car, with a corresponding reduction in the sports car's centre of gravity.

The changes also lead to a tangible improvement in front end turn-in - no mean feat for a car that was already acknowledged as a leader in dynamic performance.

Aston Martin engineers at the company's global HQ in Gaydon have worked to revise the car's dynamic stability control (DSC) in line with its significant increases in both power and torque.

As befits the more sporting nature of new Aston Martin Rapide S the car benefits from the latest Gen4 iteration of Aston Martin's hi-tech Adaptive Damping System (ADS). The system now offers three distinct settings: 'Normal', 'Sport' and 'Track', with the character of each being tailored to the nature of Aston Martin Rapide S.

The ADS automatically alters the suspension settings to ensure the driver has high levels of control at all times, with the ability to respond quickly to different driving conditions. The different damping modes help to significantly broaden the character of the Aston Martin Rapide S, adapting its set-up to suit the driver's precise requirements. Thus it can be a luxurious GT car in Normal mode with the capacity to morph into a more assertive sports car in Sport and Track modes.

The damper settings are determined by an electronic control unit which takes sensor readings from the car's systems, including throttle position, brake position, steering wheel rotation and vehicle speed. This data establishes the prevailing driving conditions and the demands the driver is making on the car.

Head of Product Development at Aston Martin, Ian Minards, explains: "Growing the power in a luxury sports car is all very well, but maximising control and 'usability' of that increased power is, just as much, the engineers' challenge.

Meanwhile, as with the new DB9, the new Aston Martin Rapide S achieves compliance with the latest European pedestrian protection regulations courtesy of its innovative new front grille design.

The lowered engine, new bonnet, new front bumper construction and new grille combine to deliver a uniquely innovative approach to pedestrian impact protection.

The patent-pending design - which features a unique 'keystone' construction - enables the grille to move rearwards on impact, whilst the central and outboard chin stiffeners give rigidity to the lower structure and support achievement of the leg impact regulations. Cut-outs on the front wing catwalks contribute to the achievement of the headform regulation.

The solution means Aston Martin can remain true to its design ethos, and avoid the use of plastic grilles and nose cone bumpers that stretch up in front of the bonnet.

First class cabin
As luxurious as it is thrilling, the new car now boasts a host of new luxury- or sports-orientated options, allowing buyers to more precisely tailor the car to their specific style.

The new optional Carbon Exterior Pack, for instance, immediately dials up the Rapide's sporting attitude. Front splitter, rear diffuser, mirror caps and rear lamp infills all fashioned from carbon fibre clearly signal the sporting nature of this 558 PS four-seater.

More pronounced luxury, on the other hand, comes from the new piano black interior pack that adds a deep, rich, mirror-like shine to the facia, transmission tunnel centre plate and door handles of the Aston Martin Rapide S. A darker surround in the instrument binnacle and steering wheel with black horn-push surround round off the pack's sumptuous additions. Luxurious blend headlinings in either tan or grey emphasise the luxury still further inside.

As would be expected of a modern Aston Martin, handcrafting is the order of the day in the Aston Martin Rapide S with the standard-fit pure glass transmission selector switches in the centre console one small yet important example of the truly authentic, bespoke, nature of the car's cabin.

However those with a desire for a more sporting ambience in their sports car will not be disappointed. Optional duotone perforated red and black leather makes its Aston Martin debut here - delivering a captivating visual combination that's unique to the new Aston Martin Rapide S.

Luxury is enhanced by the removal of extraneous 'noise' and the enhancement of desirable 'sound' - a fine distinction but one that helps the new car deliver an aural experience like no other. Improved NVH (noise, vibration and harshness) characteristics are derived from the likes of the new bonnet lining and revised windscreen cowl.

Flexibility comes in the form of four seats - the rearmost two capable of accommodating adults in a uniquely sporting setting - while at the touch of a button the individual back seats fold down to almost triple the Aston Martin's load space.

Options to further enhance the luxurious look and feel of the Aston Martin Rapide S include, subject to market, a reversing camera and twin screen rear seat entertainment system with wireless headphones, remote control and six-disc DVD changer.

Those seeking the ultimate in luxury and personalisation can also consider the 'Q by Aston Martin' service which offers uniquely-tailored options for individualisation. The Q service focuses on fashioning colour and materials with limitless boundaries precisely to customer choice and specification, enabling owners to give free rein to the creativity and indulge their desire for bespoke luxury.

Aston Martin Cygnet, 2012

Aston Martin Cygnet, 2012

The Aston Martin Cygnet is a city car that sets a new benchmark for compact luxury, building upon nearly a century of experience building high performance sports cars, luxurious long-range grand tourers, and extremely competitive racing machines.

Cygnet demonstrates Aston Martin's commitment to innovation and integrity. "It is time to think differently. Aston Martin is honest and we don't make compromises" says Aston Martin CEO Dr Ulrich Bez.

Aston Martin Cygnet expresses a simple but fundamental idea: in the modern city, scale equates to speed and freedom. At just three metres long, the Cygnet gives the driver a new dimension of freedom, able to slot into gaps in traffic, exploit the smallest parking spaces, consume the least fuel and emit the lowest emissions, all while delivering exceptional levels of quality and comfort.

Cygnet is a product of Aston Martin's unrivalled experience in craft, technology and design. The future city will present a very different luxury brand landscape, as social change and legislation increases the division between urban and anti-urban product categories. With the Cygnet, Aston Martin will be at the forefront of these changes, ensuring the company's enduring brand image will continue to prosper in new market conditions.

Dr Ulrich Bez continues: "The Cygnet is designed to support our sports cars by providing a greater degree of freedom in the urban context; it is a very special car, a premium but compact package with heart, soul and personality."

The Cygnet, a tailor fit solution for the city, will help drive Aston Martin into the future. "This car is reality; Cygnet is the natural choice for those who want a premium, bespoke commuter car."

The Cygnet will be the eighth major production car Aston Martin has introduced at its state-of-the art factory since 2004, offering further evidence of the company's ongoing commitment to British manufacturing, backed-up by a dedicated local workforce and supplier network.

Aston Martin Vantage GT4, 2009

Aston Martin Vantage GT4, 2009

 

The Aston Martin Racing has released the 2009 specification Aston Martin Vantage GT4 based on Aston Martin's new 4.7 litre Aston Martin V8 Vantage. The new Vantage GT4 builds on the success of its predecessor, the 4.3 litre Vantage N24.

The Aston Martin Vantage GT4 has been under development for six months and was unveiled in Dubai this week by Aston Martin chairman, David Richards, and tested extensively at the Dubai Autodrome.

The car is an evolution of the N24 with the larger capacity engine being more responsive with increased torque throughout the rev range. The suspension has been retuned to enhance the handling, including modified front uprights to give increased camber. The 2009 Aston Martin Vantage GT4 also has larger front brake discs with revised cooling.

The Aston Martin Vantage GT4 is built to FIA GT4 regulations and is eligible to compete in the following series: FIA GT4 European Cup; British GT4 Championship; Britcar Endurance Series; German GT4 Championship; Dutch Supercar Challenge; Dutch GT4 Championship; VLN Endurance Championship at the Nurburgring; Australian Endurance Championship; the American SCCA Championship; and the Aston Martin Owners Club Race Series.

The Aston Martin Vantage GT4 is based on the latest 4.7 litre V8 Vantage and is hand built by Aston Martin Racing. The 4.7 litre eight cylinder engine has an engine management system recalibrated for race use. It also has a free flow exhaust system and air filters, and the standard V8 dry sump lubrication system is retained, helping to prevent oil surge during cornering.

The Aston Martin Vantage GT4 can be supplied with either a six speed manual, or a Sportshift transmission with paddle controls. Both versions have a Valeo twin-plate cerametallic racing clutch and lightweight flywheel to complete the powertrain specification.

Aston Martin V8 Vantage Roadster, 2009

Aston Martin V8 Vantage Roadster, 2009

 

The Aston Martin V8 Vantage - originally launched to widespread critical acclaim at the Geneva Motor Show in 2005 - is to receive significant technical enhancements, reaffirming the car's position as one of the world's most desirable and exhilarating sports cars.

While the universally distinctive and award-winning shape of the Aston Martin V8 Vantage is retained, the car benefits from a number of technical changes which include significantly up-rated engine performance from a new 4.7 litre power unit in both Coupe and Roadster variants. Other changes include revised dynamics to take full advantage of increased power and torque availability, improved Sportshift™ transmission software and a new sports suspension option.

The 4.7 litre V8 engine has a power output of 420bhp (an 11% increase on the previous 4.3 litre unit) and delivers peak torque of 470Nm (15% increase), providing the Aston Martin V8 Vantage with new reserves of mid-range performance, an improved 0-60mph time of 4.7 seconds and top speed of 180mph (288kph). Combined European fuel economy and CO2 emissions are also improved by 13% (Sportshift™).

Inside, the changes include a new centre console and revised switchgear and the introduction of an ECU replacing the previous V8 Vantage key. Externally, the acclaimed Aston Martin V8 Vantage design appearance is enhanced with a range of new standard and optional 19'' alloy wheels.

Engine
Improvements in performance have been achieved through a number of carefully developed changes to Aston Martin's acclaimed V8 engine.
The cylinder bore and stroke has been increased from 89mm to 91mm and 86mm to 91mm respectively, giving a total displacement of 4735cc.

The increase in cylinder bore is facilitated by a move to cylinder liners that are pressed into the pre-machined aluminium alloy block, allowing a thinner liner than was possible with the cast-in design of the 4.3 litre engine.

The new forged steel crankshaft provides the 91mm stroke and incorporates new holes in the counter weights for reduced rotating mass and improved inter-bay breathing. New forged steel con-rods and cast aluminium pistons complete the capacity-related changes.

Other key changes include efficiency improvements to the dry sump lubrication system, including a new sump casting with oil pick-up points moved from the front and rear to the sides of the sump. The cylinder heads are modified with a new intake port and an inlet valve size increase from 34.9mm to 35.9mm. The intake manifold has been modified to match the new port to optimise air flow.

Transmission
The Aston Martin V8 Vantage transmissions have also undergone changes to improve performance and to handle the increased levels of power and torque. Both the standard manual stick-shift gearbox and the optional Sportshift™ transmission benefit from a modified clutch and flywheel, reducing clutch pedal efforts and delivering a 0.5kg weight saving, reducing the rotating masses within the powertrain, and hence increasing engine responsiveness.

Suspension
A series of improvements are introduced to the Aston Martin V8 Vantage chassis and suspension setup to deliver improved body control and low speed ride quality; enabling the driver to take full advantage of the increased performance potential.

Aston Martin V8 Vantage, 2009

Aston Martin V8 Vantage, 2009

 

Aston Martin V8 Vantage - originally launched to widespread critical acclaim at the Geneva Motor Show in 2005 - is to receive significant technical enhancements, reaffirming the car's position as one of the world's most desirable and exhilarating sports cars.

The 4.7 litre V8 engine has a power output of 420bhp (an 11% increase on the previous 4.3 litre unit) and delivers peak torque of 470Nm (15% increase), providing the Aston Martin V8 Vantage with new reserves of mid-range performance, an improved 0-60mph time of 4.7 seconds and top speed of 180mph (288kph). Combined European fuel economy and CO2 emissions are also improved by 13% (Sportshift™).

Inside, the changes include a new centre console and revised switchgear and the introduction of an ECU replacing the previous V8 Vantage key. Externally, the acclaimed Aston Martin V8 Vantage design appearance is enhanced with a range of new standard and optional 19'' alloy wheels.

Engine
Improvements in performance have been achieved through a number of carefully developed changes to Aston Martin's acclaimed V8 engine.
The cylinder bore and stroke has been increased from 89mm to 91mm and 86mm to 91mm respectively, giving a total displacement of 4735cc.

The increase in cylinder bore is facilitated by a move to cylinder liners that are pressed into the pre-machined aluminium alloy block, allowing a thinner liner than was possible with the cast-in design of the 4.3 litre engine.

The new forged steel crankshaft provides the 91mm stroke and incorporates new holes in the counter weights for reduced rotating mass and improved inter-bay breathing. New forged steel con-rods and cast aluminium pistons complete the capacity-related changes.

Other key changes include efficiency improvements to the dry sump lubrication system, including a new sump casting with oil pick-up points moved from the front and rear to the sides of the sump. The cylinder heads are modified with a new intake port and an inlet valve size increase from 34.9mm to 35.9mm. The intake manifold has been modified to match the new port to optimise air flow.

Transmission
The Aston Martin V8 Vantage transmissions have also undergone changes to improve performance and to handle the increased levels of power and torque. Both the standard manual stick-shift gearbox and the optional Sportshift™ transmission benefit from a modified clutch and flywheel, reducing clutch pedal efforts and delivering a 0.5kg weight saving, reducing the rotating masses within the powertrain, and hence increasing engine responsiveness.

Aston Martin Lagonda Concept, 2009

Aston Martin Lagonda Concept, 2009

 

 

The Aston Martin Lagonda Concept celebrates 100 years of car production under the Lagonda brand, a stunning contemporary evolution of this evocative name.
The modern Lagonda marries functionalism with luxury, through organic forms, rich materials and complex surfaces. The car is based on an advanced platform that is tailored to accommodate a broad range of future powertrains, including flexfuel, low emission diesel and hybrid systems.

The clear delineation between cabin, shoulder and flank is strongly reminiscent of the powerful and evocative lines of the 1930s era Lagondas, in particular the V12-engined version of the LG6. Viewed from the front of the concept, the deep, strong grille also evokes the presence and frontage of the cars from the inter-war era. The bold character lines that run along the sculpted flanks to the rear ensure the concept is planted firmly on the road. The large 22" wheels and cut-away bodywork offer exceptional ground clearance, while the concept's V12 engine delivers power through all four wheels.

A modern automotive brand must have strong core values and a broad range of abilities. The modern Lagonda will be the pre-eminent long-distance automobile, a vehicle that combines cosseting luxury with extreme functionality and technological innovation.
The Lagonda name has been an integral part of the Aston Martin story since 1947. The Aston Martin Lagonda Concept illustrates how the brand will once again stand together with Aston Martin as the perfect complement to modern performance. A Lagonda stands for functional elegance, performance, simplicity and comfort.

Lagonda: Revival of a Luxury Brand
Aston Martin is proud to announce the return of Lagonda, one of the most iconic names in luxury car manufacturing. The intention is for Lagonda to enter the market place with a unique performance luxury product, a vehicle that combines exceptional ability with unsurpassed elegance, inside and out.

Lagonda's return signals a major expansion of Aston Martin's product line, taking the company into new and emerging markets around the world. To demonstrate the Lagonda vision, the Aston Martin Lagonda Concept has been created, a car that epitomises the intersection of craft, design and technology with Aston Martin's established high performance expertise.
The return of Lagonda fulfils a long-term vision. Aston Martin's modern era began in 2001 with the launch of the V12 Vanquish and the construction of the award-winning headquarters at Gaydon, Warwickshire in 2003. In the years that followed, Aston Martin has launched four class-leading new products, revitalising the performance GT category and redefining automotive beauty.

Aston Martin's award-winning range, the DBS, DB9, Vantage and forthcoming Rapide and One-77, represent some of the most beautiful high performance cars ever built, refined, highly crafted and extremely well-engineered. An Aston Martin will always be a sports car; modern, exclusive and beautiful, it demands to be driven, with an exceptional character that rewards the enthusiast, both on the road and on the track. Above all, an Aston Martin creates an emotional response. It is a machine with soul.

Heritage
Lagonda is one of the great names in automotive history, a brand associated with luxury, performance, grace and exclusivity. Since the first Lagonda production car, was built 100 years ago by the American-born Wilbur Gunn, the Lagonda name has undergone several incarnations, before it soon began to excel at creating racing cars and sporting saloons.

Gunn's first car was built in his home workshop in Middlesex, England in 1909. In 1910, Gunn drove his 16/18hp Lagonda Tourer to victory in the Russian Reliability Trial, a spectacular event run by the Imperial Automobile Club of Russia as a public relations exercise for the country's nascent road system. The win brought in many orders, and Gunn focused his attention on the Russian market, establishing dealerships in St Petersburg and Moscow in 1910.

Throughout the 20s and 30s, the company expanded its premises in Staines, England with the light cars giving way to more substantial touring models. Lagonda came to epitomise the Edwardian passion for setting new records and exploring new territories, with robust and reliable vehicles that could effortlessly forge trans-continental links.

The M45 quickly became known as a car for the discerning sportsman, fast and capable yet also sufficiently comfortable for long journeys. In its day it had the largest engine in its class, a distinction that attracted owners like the land speed record holder Sir Malcolm Campbell, who had his M45 painted in his signature blue.

The emerging sport of long-distance endurance racing also became an integral part of Lagonda's development. In June 1935, a lightweight version of the M45 won the Le Mans 24 hours, with John Hindmarsh and Luis Fontes behind the wheel. This was a landmark achievement for the brand, as well as a highpoint of British sports car racing in the interwar era following Bentley's heyday in the 1920s.
 

The Lagondas of the 1930s demonstrated total harmony between engineering and appearance, including the stately LG6 model introduced in 1937. W.O. Bentley's diligent innovation and refinement continued throughout the war, and the company developed the LG6 into a V12 model, an even more 'imposing and dignified' saloon that sadly ceased production before the start of the war. Simultaneously, the engineer developed a new six-cylinder engine, during the war, the benefits of which were soon to be reaped by Aston Martin.

Feeley was responsible for the elegant drophead variant of the new 2.6 litre, the first Lagonda of the David Brown era, produced from 1948 to 1953. At the end of 1952 the 2.6 litre was developed into the 3.0 litre, which used a revised version of the W.O. Bentley engine. The two-door saloon was soon joined by a four-door and a drophead coupe. The next Lagonda was the Touring-designed Rapide of 1963, a sleek four-door saloon that shared many components with the Aston Martin DB4. Fifty-five were built, of which 48 survive. In the late 1960s, Aston Martin's head designer, William Towns, developed a new four-door saloon from the Aston Martin DBS. Just seven examples were built in the mid 1970s.

Aston Martin DB9 Volante, 2009

Aston Martin DB9 Volante, 2009

 

 

The Aston Martin introduced a revised version of the company's critically acclaimed Aston Martin DB9 at the 2008 Geneva Motor Show, which includes significant enhancements to standard specification. These changes include a revised version of Aston Martin's 6.0 litre V12 engine to deliver improved power and torque. Peak power of 470bhp (350kW) - increased by 20bhp (30Nm) - is now reached at 6,000rpm, resulting in a power to weight ratio of 267bhp per tonne (199kW/tonne) - an increase of 11bhp per tonne over the existing Aston Martin DB9.

Peak torque of 600Nm is delivered at 5,000rpm, providing even more accessible power for the driver, as well a greater performance feel overall. Accordingly, top speed is now 190mph (306km/h) and the benchmark 0-60mph time improves by 0.3 seconds for the Touchtronic transmission - which benefits from a new valve box and integrated transmission controls to achieve quicker gear shifts - to 4.6 seconds and by 0.1 seconds to 4.6 seconds for the manual gearbox.

The latest Aston Martin DB9 also incorporates a series of chassis developments for both the Coupe and Aston Martin DB9 Volante derivates. Bilstein dampers are introduced in addition to revised upper suspension arms and retuned suspension bushes to deliver improved ride quality; aiding greater refinement in the Aston Martin DB9 Volante and an enhanced sporting feel in the Coupe. The Aston Martin DB9 Volante also benefits from revisions to the front shear panel which increases torsional rigidity by 10%, further improving refinement.

The Aston Martin DB9 manages to combine all facets of style, quality and usability of a traditional Aston Martin without relying on retrospective detail or design. Accordingly, styling changes to the revised Aston Martin DB9 are subtle, reflecting the car's timeless design and understated elegance.

Exterior styling changes include the introduction of a new standard 19'' 10-spoke alloy wheel, new door mirrors and a revised anodised aluminium five-bar grille. In the cabin changes include a new centre console constructed from die cast zinc with a painted iridium silver finish and the introduction of a new Emotion Control Unit (ECU) - first seen on the Aston Martin DBS in 2007. The ECU - constructed from glass, polished stainless steel and polycarbonate - replaces the key used previously for the Aston Martin DB9.

The innovative Aston Martin DB9 introduced an exciting new era for Aston Martin. The 2+2 sports car set new standards in its class due to its astonishing combination of technology, agility and design. The car marked the beginning of a new era for Aston Martin and became the first car to be hand-made at the company's state-of-the-art facility in Gaydon, Warwickshire.

Aston Martin DB9, 2009

Aston Martin DB9, 2009

 

 

Aston Martin introduced a revised version of the company's critically acclaimed Aston Martin DB9 at the 2008 Geneva Motor Show, which includes significant enhancements to standard specification. These changes include a revised version of Aston Martin's 6.0 litre V12 engine to deliver improved power and torque. Peak power of 470bhp (350kW) - increased by 20bhp (30Nm) - is now reached at 6,000rpm, resulting in a power to weight ratio of 267bhp per tonne (199kW/tonne) - an increase of 11bhp per tonne over the existing Aston Martin DB9.

Peak torque of 600Nm is delivered at 5,000rpm, providing even more accessible power for the driver, as well a greater performance feel overall. Accordingly, top speed is now 190mph (306km/h) and the benchmark 0-60mph time improves by 0.3 seconds for the Touchtronic transmission - which benefits from a new valve box and integrated transmission controls to achieve quicker gear shifts - to 4.6 seconds and by 0.1 seconds to 4.6 seconds for the manual gearbox.

The latest Aston Martin DB9  incorporates a series of chassis developments for both the Coupe and Aston Martin DB9 Volante derivates. Bilstein dampers are introduced in addition to revised upper suspension arms and retuned suspension bushes to deliver improved ride quality; aiding greater refinement in the Aston Martin DB9 Volante and an enhanced sporting feel in the Coupe. The Aston Martin DB9 Volante also benefits from revisions to the front shear panel which increases torsional rigidity by 10%, further improving refinement.
 

The Aston Martin DB9 manages to combine all facets of style, quality and usability of a traditional Aston Martin without relying on retrospective detail or design. Accordingly, styling changes to the revised Aston Martin DB9 are subtle, reflecting the car's timeless design and understated elegance.

Exterior styling changes include the introduction of a new standard 19'' 10-spoke alloy wheel, new door mirrors and a revised anodised aluminium five-bar grille. In the cabin changes include a new centre console constructed from die cast zinc with a painted iridium silver finish and the introduction of a new Emotion Control Unit (ECU) - first seen on the Aston Martin DBS in 2007. The ECU - constructed from glass, polished stainless steel and polycarbonate - replaces the key used previously for the Aston Martin DB9.

The innovative Aston Martin DB9 introduced an exciting new era for Aston Martin. The 2+2 sports car set new standards in its class due to its astonishing combination of technology, agility and design. The car marked the beginning of a new era for Aston Martin and became the first car to be hand-made at the company's state-of-the-art facility in Gaydon, Warwickshire.

Aston Martin Cygnet Concept, 2009

Aston Martin Cygnet Concept, 2009

 

Aston Martin releases the first official images of the Aston Martin Cygnet Concept - a new luxury commuter concept car.

The Aston Martin Cygnet concept represents a creative, environmentally conscious solution, being small, yet with presence - and highly fuel efficient, now combined with the prestige of Aston Martin's luxury brand ownership.

Work on the concept is ongoing and continue into 2010 when it is hoped that it become a production reality initially available to Aston Martin customers in the UK and Europe.

Aston Martin DBS Infa Red, 2008

Aston Martin DBS Infa Red, 2008

 

 

Equally at home on a twisting mountain circuit as on the open road, the DBS is a true thoroughbred. The Aston Martin DBS is a 6.0-litre V12 powered, race-bred, two-seater shaped by the aerodynamic demands of high performance, with an exquisite interior that marries beautifully hand-finished materials with the very latest in performance technology.

A combination of elegant design, innovative manufacturing processes, race-derived materials and components and Aston Martin's unrivalled hand-build expertise makes the Aston Martin DBS a luxury sports car without equal. Every line, crease and curve conveys the enormous potential of the Aston Martin DBS, a seductive blend of refinement and raw power, provided by the hand-built V12 producing 380kW (510bhp/517PS), a top speed of 191mph (302km/h) and a 0-62mph (0-100km/h) time of 4.3 seconds.

Aston Martin DBS: Performance
The need for high-performance stability, handling ability and low kerb weight defined the DBS's form and construction. Accordingly, the Aston Martin DBS becomes the first production Aston Martin to make extensive use of ultra-light carbon-fibre body panels. High levels of performance and control are delivered by the combination of inherent light weight, near-perfect weight distribution, a supremely powerful and flexible V12 engine, and a performance-honed six-speed transmission, together with new carbon ceramic brakes and an adaptive damper controlled suspension system.

At the heart of the Aston Martin DBS is a 6.0-litre V12 engine. The DBR9 and DBRS9 race cars are powered by an enhanced version of this same V12, tuned to produce in excess of 600bhp. The shared powerplant continues the strong link between Aston Martin's road and race cars, just as the six-cylinder engine used in the DBR1 also powered the Aston Martin DB4, DB5 and DB6 in the 1950s and 60s.

As with all current Aston Martins, the engine is hand-assembled at Aston Martin's dedicated engine facility in Cologne, Germany. The classic 6.0-litre V12 features a number of power-increasing enhancements. These include a 'by-pass' engine air intake port that opens above 5500rpm to allow more air into the engine, and re-profiled air inlet ports that further improve airflow into the combustion chamber. Combined with a compression ratio of 10.9:1, the result of these enhancements is prodigious power and torque: the Aston Martin DBS delivers 380 kW (510 bhp/517 PS) at 6500 rpm. The 3.71:1 final-drive ratio ensures that the additional power is usable, enhancing in-gear acceleration in particular.

Aston Martin DBS: Control
As with the DB9 and DBR race cars, the Aston Martin DBS benefits from the inherent characteristics of the VH architecture. The VH underframe consists of pressed, extruded and cast aluminium components, bonded together to create an immensely strong underlying structure.

This structure means that weight is kept to a minimum, with the front-mid mounted engine and rear-mid mounted transaxle ensuring a near perfect weight distribution: 85% of the car's weight is positioned within its wheelbase. The Aston Martin DBS's polar moment of inertia is therefore very low, producing a car with natural agility, a strong, stable platform for the V12's high power output and an exhilarating driving experience.

To take full advantage of its extremely precise and rigid platform, the Aston Martin DBS employs a new and sophisticated Adaptive Damping System (ADS) which uses two separate valves to set the dampers to five different positions, allowing instant adjustment of the car's ride and handling characteristics. The ADS automatically alters the suspension settings to ensure the driver has high levels of control at all times, with the ability to respond instantly to different driving conditions. The dampers can be 'softer', with a corresponding improvement in ride quality, or 'firm', providing improved body control for more spirited driving.